Automatic Metal Hydraulic Baler Side Push out Scrap Baling Press For Waste Aluminum Profile Window

Our scrap metal baler is configured with shearing blades on the lid and sides of compress room. Therefore, the large sized material can be cut first and then be compressed. The bale discharging method is side push out, improving the safety of operation and making the bale convenient for transportation.

Technical parameters:

1. This side push out baler adopts the hydraulic drive system, reasonable design and compact structure. It is characterized by small volume, light weight, small inertia of movement, low noise, high moving stability, operating flexibility and other strong points.

2. With the incorporated hydraulic and electrical control, this machine is user-friendly and it is easy to realize the overload protection.
3. It is well adapted to different working conditions and has wide applicable range, like processing equipment in the metal recycling and processing unit, furnace charge processing machine in foundry, etc.
4. Our side push out baler is energy saving, convenient for installation, safe, reliable and efficient while working.

Brief Introduction of Baling Process 
At first, the waste material for baling should be loaded into the compacting box manually or mechanically. The Lid cylinder starts to revolve the Lid to the right position for sealing the compacting box completely. Then the ejectors of the side cylinder and the main cylinder squeeze the waste materials into bale. Relying on the locking door cylinder, the locking door will be opened. The ejector of the main cylinder will push the bale out of the compacting box, finishing the baling process.

Optional Extra

Conveyor Feeding
Oil heater
Oil cooler

              Diesel Engine Drive

Applications

                Non Ferrous Metals

                Coppers

Aluminum Cans 

Aluminum Windows 

Scrap Aluminums

25 Liter Drums 

Tin Cans 

Steel Shavings 

Aluminum Chips 

Aluminum Sheets 

Aluminum And Copper Wires